VII. Safemesh remote_control manual

* * * > **This document is a manual for remote connectivity features for the SafeMesh system** > **Adaptation system version**: V1.0.0 > **Document version**: V1.0 > **Release date**: January 1, 2026 > **Published by**: EFFORT * * * # Document revision records | Version number | Revision date | Summary of revisions | Reviser | Reviewer | | --- | --- | --- | --- | --- | | V1.0 | 2026-1-1 | Initial release | Michel | Shyne | * * * # 1\. Preamble ## 1.1 Document Objectives * Introduce users to the remote connectivity scheme provided by SafeMesh for remote access control capabilities. ## 1.2 Target audience * Project manager * Internet of Things operation and maintenance personnel, IT facility operation and maintenance personnel ## 1.3 Document Scope * Introduction to remote connection functions ## 1.4 Related Documentation * Prerequisite Document: Software Installation and Configuration Manual * Related document: Software User Operation and System Administration Manual ## 2\. Function description * With the remote control feature, you can access a remote internet software system deployed locally. * In the office, you can access different regional system software by entering a specific domain name in your browser. * The content of the remote access web page is the same as the on-premises web page, and the data is shared. ## 3\. Usage requirements * Warning: System version number >= 1.0.20. * Warning: The SafeMesh system is installed locally. * Warning: The remote control feature can only be enabled within the LAN where the system is deployed. * Warning: The local area network (LAN) on which SafeMesh is installed must have access to the Internet for the remote control function to function properly. * Warning: Once remote is turned off, remote control is not possible unless remote control is enabled within the LAN where the system is deployed. ## 4\. Steps to use ### 4.1 Configuration page  Configure the path Open the local system and go to the system configuration page. Path: Settings -> System Settings -> Remote Connection ### 4.2 First Time Use Feature  First use When the remote control feature is first enabled, a prompt pops up because there is no activation file on the localhost. You'll need to follow the prompts to send the local key (and your desired domain name) to your system provider. You can upload the activation file when the system vendor is ready to send it to you. ### 4.3 Select Activate File  Select Activate File After receiving the activation file, click "Click to upload activation file" and select the activation file. ### 4.4 Upload Files  Upload files Click "Upload" to upload the activation file. ### 4.5 Configuration page after uploading the activation file  After configuration You can see remote access domains marked 1 on the page. The button marked 2 can be used to toggle the function on and off. ### 4.6 Open Functions  Enable functions Click on the button to activate the feature. You can click the back button to change the configuration. ### 4.7 Remote Access via Domain Names  Remote access Remote access is possible by entering the domain name into the browser. ## 5\. FAQs ``` Q1：无激活文件 A1：请与系统销售方沟通并提供相关信息，以便后续获取激活文件 Q2：已上传文件但仍无法访问 A2：请按以下步骤检查： 1.确认上传激活文件后，已点击配置页面的开关按钮启用远程功能。 2.检查安装 SafeMesh 的本地网络是否能正常访问互联网。 3.检查本地防火墙或网络安全策略是否阻止了 SafeMesh 的出站连接。 ``` ## 6\. Technical support * Technical support email: [technical@effortled.com](mailto:technical@effortled.com)